Placeholder
Oct 05, 2017 8

The complete Air conditioning installation Guide

Have you just bought a new air-conditioner for your home or office? If yes, then the next step is to install it. Whether you are looking forward to knowing the process of installation so that you can install it yourself or to know the basics before you hire a professional, here is a comprehensive air conditioning installation guide.

Mount the Outdoor and Indoor Units at the Perfect Spot

The first and foremost step for installing an air-conditioner is to find the right spot. An air-conditioner usually consists of two units; the indoor unit and the outdoor unit. For the indoor setting, it is imperative to choose a place that is not close to doorway and would not hinder the air circulation by any means. It should ideally be 7-8 feet above the ground for maximum effect.

For the outdoor condenser unit, find a place with no direct sunlight as it will help the unit to run efficiently. Also, make sure there is enough place around the outdoor unit for the hot air to escape easily. If it's too close to the opposing wall, the hot air might bounce back making the outdoor unit trip.

Install Wires and Pipes

There are three main connections that you need to take care of once you have mounted the indoor and outdoor unit. These are the electrical wires, the copper pipe for the refrigerant to pass through and the drainage pipe for draining out water from the indoor unit. Make sure you draw this path mentally before you even choose the location of the indoor and the outdoor unit. This should have as many fewer bends as possible in order to enhance efficiency.

Set the Connection

When connecting the pipes and wires, make sure you take extra precaution. For starters, use a wrench to tighten the pipes at the end but do not over tighten it. Once secured, make sure you check for gas leaks. Use soapy water to test the leakages around the joints. Now, as for wires, make sure they are again securely connected to the electrical points, and all screws are tightened. Lastly, the drainage pipe connected to the indoor unit should be in decline position all throughout until the end, or else water will stall which could also cause the air conditioner to stop working.

Use insulation pipe to secure connection wires

Once all the connections are secure, apply some protective layer especially over the electrical wires and the copper pipe. Use insulation pipe to ensure the copper pipe is properly insulated. Use electrical tape to ensure that all the electrical joints are protected properly.

Take Professional support

Although you can install the air conditioning system on your own, you will still need an professional support to complete the task. The experts may not only fit the system but will definitely provide tips for its efficient working.

Follow these steps given in the air conditioning installation guide and you can easily install the air conditioner to keep your home cool throughout summer. After all, a properly installed AC provides the coolest air.

Share

maker